Portfolio | Coordination Drawings

Using Mozilla Firefox? Make sure to check your download folder to see our full size PDF samples.
If you are using another browser, full size drawings will be opened in a new tab.

Mechanical ductwork coordination drawings samples

Our MEP / ductwork coordination drawings will show detailed information for the fabrication and installation of your trade in the field. Working with shop drawings instead of value engineering will prevent costly field adjustments and will help you save on the cost of pre-fabricated materials.

• Units names, units sizes and service area per approved submittals;
• Ductwork sizes per contract drawing sizes whenever possible;
• Sound-lining and sound insulation per specs;
• Ductwork fitting type and sheet metal sectioning (TDC, S-SLIP);
• Diffusers, diffusers identification, CFM information and flex connections;
• Volume dampers, Fire dampers and Mechanical dampers;
• Round elbows whenever possible, to reduce the ductwork fabrication cost of the contractor;
• Top and bottom elevation of ductwork, indication of transitions UP/DN with rise/offset distance;
• Horizontal and vertical dimension lines from the duct to the closest grid line or wall.

HVAC piping coordinated drawings samples

Our MEP / HVAC piping coordination drawings will show detailed information for the installation of your trade in the field. Working with shop drawings instead of value engineering will prevent costly field adjustments and ensure that the sloping pipes will fit with other trades.

• Units names, units sizes and service area per approved submittals;
• Pipes sizes per contract drawing sizes and units submittals;
• Valves per contract drawing floor plans;
• Top and invert elevation of pipes or center of pipe, per the preference of the customer;
• Horizontal and vertical dimension lines from the center of pipe to the closest grid line or wall.
• Floor sleeves, wall sleeves and roof penetrations drawings if requested;
• Exact pipe connections to units, if requested by BIM LOD.

Plumbing coordinated drawings samples

Our MEP / plumbing coordination drawings will show detailed information for the installation of your trade in the field. Working with shop drawings instead of value engineering will prevent costly field adjustments and ensure that the sloping pipes will fit with other trades.

• Pipes sizes per contract drawing sizes and units submittals;
• Valves per contract drawing floor plans;
• Top and invert elevation of pipes or center of pipe, per the preference of the customer;
• Distance from the center of pipe to the closest grid line or column ID;
• Floor sleeves, wall sleeves and roof penetrations drawings if requested;
• Exact pipe connections to units, if requested by BIM LOD.

Electrical coordinated drawings samples

Our MEP / electrical coordination drawings will show detailed information for the installation of your trade in the field.

• Unit sizes per approved submittals;
• Unit clearances for access;
• Pads for units;
• Conduit sizes per contract drawings/diagrams;
• Horizontal and vertical dimension lines from the center of pipe to the closest grid line or wall.
• Sleeves when requested;